How To Replace Door Handle For 2012 Toyota Camry Youtube

How to Supplant a Broken Door Handle on a Toyota or Lexus Sedan (With Videos)

• Comment

Hardlymoving writes about practice-it-yourself auto maintenance on various makes and models.

Toyota Camry / Lexus ES300 Commuter's Side Exterior Door Handle

When door handles pause, they typically break during the winter, when icy conditions combined with moisture freeze the door in identify and the commuter yanks, pulls, and jerks on the door handle to get the door to open up.

If you lot are worried that you might break your door handle during the winter while trying to open it, pour warm water around the edges of the door before attempting to open it.

You can buy relatively inexpensive pre-painted door handles on Amazon or eBay.

This article volition show you lot step-past-step how to replace the driver's-side door handle on a 1997 Lexus ES300. The procedure to supervene upon this door handle applies to other Toyota and Lexus passenger vehicles including the Toyota Camry. Moreover, it applies to the rider side likewise, though at that place may be modest differences involved in removing the door panel to get to the service ports in the door.

The videos beneath, with text instructions, will show you pace-by-footstep how to supercede the driver's side exterior door handle on a Lexus ES300. Each video is queued upward to brainstorm at the appropriate step of the door handle replacement.

one. Remove the Door Panel

• Remove the screw cover below the radio speaker using a pick tool. Then remove the panel screw.
• Remove the interior door handle screw. Use a option tool to pop open the door handle screw cover. The cover is hinged then information technology does non come up off. Remove the screw.
• Remove the door-mounted associates that controls the window and door lock. Use a pry tool and wiggle information technology between the frontward portion of the panel lip and console mounting pigsty. Pushing the pry tool dorsum should compress the hidden locking bound assuasive y'all to pull the command assembly out. This will expose the screw that connects the panel to the door. Remove that screw and disconnect the control assembly electrical connectors.
• Remove the interior door handle bezel. The bezel has two mounting holes that tie the door lock tab (on tiptop) and the door handle (on the lesser). Use a pry tool to separate the door lock tab and door handle from the bezel. Gently pull the bezel out from the back.
• Remove the mini speaker cover on the elevation corner of the door. Gently pry off with a pry tool.
• Using a pry tool, and starting from the bottom of the door, detach the door panel from the door past pulling on the panel assisted with the pry tool. The push pins should release its tension.
• Subsequently pulling off the panel, disconnect whatsoever electrical connexion going to it.

2. Pare Off the Door Vapor Barrier and Remove the Service Port Panel

• Gently peel the translucent plastic vapor barrier off of its layer of black semi-agglutinative glue. Do not rip it. You'll be re-installing it after the door handle has been replaced.
• If the window is not in the raised position, re-connect the window motor command assembly electrical plumbing fixtures and enhance the window.
• Remove the blackness service port panel.

Scroll to Proceed

Read More from AxleAddict

iii. Remove the Two Door Handle Bolts and Disconnect the Door Lock and Door Handle Command Rods

• Through the service port holes, remove the two bolts that agree the outside door handle.
• Disconnect the metallic door lock control rod from the door lock. Using a thin tip screw commuter through the port pigsty, pull the plastic rod retainer prune away and off the rod. Using your right hand to concord the rod, use your left manus with the screw commuter to pull the rod out of the retainer. Since it's in there pretty tight, some force may have to be used to pull it out.
• Disconnect the metal door handle control rod from the door handle. Using a thin-tipped screw driver through the port hole, pull away the plastic rod servant clip off the rod. Use the screw driver to pull the rod out of the retainer. Once again, some force may have to exist used to pull it out.

4. Remove the Old Door Handle and Transfer the Door Lock Cylinder

• The one-time door handle can be removed by tilting the peak portion out and then pull information technology upwards.
• Detach the door lock cylinder and transfer it to the new door lock.

five. Install the New Door Handle

• Tilt in the new door handle. The base of the handle has grooves that connect to the lesser of the door handle opening.
• Install the 2 door handle bolts. I ecommend you lot identify a paper towel between the nut and the installation socket and so the nut does not come up off.
• Connect the door lock cylinder control rod and the door handle control rod.
• Test that the door handle is working properly along with the door lock cylinder.

six. Re-install the Service Port Console, Vapor Barrier, Door Panel and Window Control Assembly

• Bolt on the service port console.
• Position and press on the vapor barrier on to the semi-adhesive glue.
• Lower the window.
• Clip on any electrical fittings to the door console.
• Position the window command assembly wires through the door console.
• Angle the pinnacle portion of the door console over the mounting lip of the door.
• Align the press pins in the door console with the door and push the door panel against the door.
• Install the speaker cover.
• Screw in the door panel spiral in the window control assembly pigsty.
• Angle in the interior door handle bezel in to the rectangular clip then push the bezel until information technology clips in with the pivot points on the door handle and door lock tab. Screw in the bezel spiral.
• Connect the wire harness to the window control associates and mount back into the door panel.
• Screw in door panel spiral below the door speaker. Install the spiral cover.

This commodity is authentic and truthful to the best of the author's knowledge. Content is for informational or entertainment purposes only and does not substitute for personal counsel or professional advice in business, fiscal, legal, or technical matters.

© 2018 hardlymoving

Related Articles

4WD Not Working? Chevy Trailblazer 4-Wheel-Drive Problems

Possibly this article will help other folks with the aforementioned 4WD symptoms who've exhausted all the other possible solutions. Or, maybe it will just make you pull more hair out because information technology doesn't aid you at all. Hopefully the onetime. Continue in mind, I'm non a mechanic, equally I'thousand sure yous'll be able to tell.

How to Check Your Cooling System

Exercise you suspect your coolant is not circulating through your engine? Hither's how to practice a cooling system check to notice the source of leaks, overheating, and overcooling problems.

Source: https://axleaddict.com/auto-repair/How-to-Replace-a-Broken-Door-Handle-on-a-Toyota-or-Lexus-Sedan-With-Videos

Posted by: carterprilese.blogspot.com

Share this post